Attachments
Showing 13–24 of 97 results
-
Digga Backhoe – High Flow Auger Drives
Read more
Read moreDigga’s PD4HF to PD10HF range of drilling auger drive units are ideally suited for backhoes with a flow between 50 to 200 lpm. Fitted with Digga / Eaton bell motors with integrated pressure relief valve and input housing. Innovative design allows the gearbox to go down the hole to maximise drilling depth without extensions, eliminating downtime and minimises maintenance, optimising your returns. Digga planetary auger drives are specially designed for drilling and augering in most ground conditions.
- Compact high torque Digga manufactured gearbox
- Highly efficient design with less moving parts
- Fitted with Eaton/Digga geroler hydraulic motor
- Full range of shafts available upon request
- Extreme duty shaft locking system
- Drive fits down the hole for greater digging depth
- Low maintenance with 5yr gear box and 3yr motor warranty
Quick View -
Digga Bigfoot Trenchers
Read more
Read moreTrenchers for machines up to 4.5T
Ideal for excavators up to 4.5 tonne, skid steer loaders, tractors, and mini machines, the Bigfoot Trencher can be used for pipe laying for irrigation, underground power & communications, road repairs, general construction.
Adjustable depth skid foot
Precision depth control ensures the spoil auger has optimum ground clearance. Take advantage of every bit of valuable horsepower when trenching. Preset depths: 600 / 750 / 900mm.
Heavy-duty crumbing system
Start trenching with the crumber in-ground. A super heavy duty spring ensures the crumber stays engaged with the bottom of the trench for maximum spoil removal from start to finish. View animation.
Skid foot can be seen from the cab
The new design foot can be clearly seen from the cab and allows the operator to see when the trencher is in the correct trenching position. No need for a spotter.
A cleaner work-side of the trench
Digga’s new foot design also feeds overburden back onto the chain, transferring it to the spoil auger for a cleaner clearer work side of the trench.
Anti-back flex chain design
You can be guaranteed of quality and superior performance with our Anti-back Flex design. It prevents the chain links from flexing back in tough soil conditions.
Trench in all ground conditions
Available in a number of different tooth configurations for trenching in soft ground, mixed grounds and even permafrost so you can get the job done no matter what environment you are in. See chain options.
Chains for all ground conditions
- EARTH – Best used in soft ground like earth and clay
- COMBINATION – Best used in dry, hard or medium ground conditions
- TUNGSTEN – Best used in hard or frozen ground conditions and asphalt
Quick View -
Digga Bigfoot XD Trenchers
Read more
Read moreTrenchers for machines up to 8T
Ideal for excavators up to 8 tonne, skid steer loaders, backhoes, and tractors, the Bigfoot XD Trencher can be used for pipe laying for irrigation, underground power & communications, road repairs, general construction.
Adjustable depth skid foot
Precision depth control ensures the spoil auger has optimum ground clearance. Preset depths range between 450-1200mm for standard flow machines, and 600-1500mm for high flow machines.
Heavy-duty crumbing system
Start trenching with the crumber in-ground. A super heavy duty spring ensures the crumber stays engaged with the bottom of the trench for maximum spoil removal from start to finish. View animation.
Skid foot can be seen from the cab
The new design foot can be clearly seen from the cab and allows the operator to see when the trencher is in the correct trenching position. No need for a spotter.
A cleaner work-side of the trench
Digga’s new foot design also feeds overburden back onto the chain, transferring it to the spoil auger for a cleaner clearer work side of the trench.
Anti-back flex chain design
You can be guaranteed of quality and superior performance with our Anti-back Flex design. It prevents the chain links from flexing back in tough soil conditions.
Trench in all ground conditions
Available in a number of different tooth configurations for trenching in soft ground, mixed grounds and even permafrost so you can get the job done no matter what environment you are in. See chain options.
Chains for all ground conditions
- EARTH – Best used in soft ground like earth and clay
- COMBINATION – Best used in dry, hard or medium ground conditions
- TUNGSTEN – Best used in hard or frozen ground conditions and asphalt
Quick View -
Digga Cement Mixa
Read more
Read moreDigga’s Cement Mixa can mix anything from cement to fertilizer and fits quickly and easily to your Digga Planetary Auger Drive (Auger Drive sold separately).
- Easy to install
- Suits all Digga Auger Drives, Mini Auger Drives and auger drives fitted with Swing Control System
- New Design with easy connection
- Maintenance-free
Quick View -
Digga Cleana Bucket Broom
Read more
Read moreThe Cleana bucket broom is a quality Australian made forward and reverse bucket broom for skid steer loaders, front end loaders, and telehandlers. Featuring high performance hydraulic components, a hinged lid for fast emptying, heavy duty wheels, and replaceable bucket wear edge. A removable side shift frame is available in a variety of widths to suit all machines.
Sweeps & collects
Sweeps and collects all kinds of debris in factory car parks, road construction, stock yards, shipping containers, and more.
Innovative design
Our range of bucket brooms feature easy-to-use built-in brush adjustment handles; so no tools are required, as well as a one piece 24″ poly brush for longer brush life and easy replacement. A replaceable cutting edge on the bucket extends the life of the attachment.
Optional extras
As an optional extra, a side broom sweeper can be attached to the broom and operated through hydraulic lines. This rotating sweeper can be manually set to various operating heights.
Machine suitability
Suits skid steer loaders, front end loaders, and tele-handlers. Features replaceable machine pickups for multiple machine use. A removable side shift frame is also available in a variety of widths to suit all machines. Need more flow? High flow models also available.
Full range of sizes
Bucket broom range of sizes available include 1600mm, 1700mm, 1800mm, 2000mm, 2500mm and 3000m.
Australian made
Our product quality and innovation leads the industry. 100% Australian made, designed and manufactured for Australian conditions, providing you with versatility, competitive pricing and a factory-backed warranty.
Quick View -
Digga Cleana Open Face Bucket Broom
Read more
Read moreAn open face broom is a bucket broom with an open front allowing you to sweep right up against walls and gutters. Quality Australian made featuring hi performance hydraulic components, heavy duty wheels, replaceable wear edge on bucket and removable side shift frame. Range of sizes available; 1600mm, 1800mm and 2000mm
Suit Machine Types:Â Skid Steer Loaders, Front End Loaders and Tele-Handlers.
(extra charge may be incurred for machines other than skid steer loader)Features:
• Replaceable cutting edge on bucket
• 1 piece poly brush for longer brush life and easy replacement
• Replaceable machine pickups for multiple machine use
• Removable side shift frame available to suit most machines
• Height adjustable
• High flow options available
• Easy to empty bucket
• Full range of sizes available; 1600mm, 1800mm and 2000mmIdeal Use:
• Sweeps and collects all kinds of debris in factory car parks, road construction, stock yards, shipping containers and more.
• Sweeps right up against structures, walls and guttersMachine Suitability:
• Skid Steer Loaders, Front End Loaders and Tele-Handlers.(extra charge may be incurred for machines other than skid steer loader and non standard frames)Quick View -
Digga Continuous Flight Augers
Read more
Read moreDigga manufactures a range of continuous flight augers ideally suited for soil sampling, under road boring and drilling for bore water. Continuous flight augers suit Exploratory Micro Drill Rigs, Small Soil Sampling Vehicles and Mini Loader Drill Mast. Need a complete custom solution? Visit our Custom Auger section.
Australian made quality
Over 30 years of auger design and manufacturing using only the highest quality material has resulted in an extremely efficient cutting head design and optimum flight pitches to provide maximum soil removal in all ground conditions.
Replaceable Pilots
A variety of pilots are available in Tungsten or Multi Faced Tungsten to suits standard to hard ground conditions. 80mm to 125mm sizes available.
Length and width options available
1200mm to 1800mm length options and 65mm to 200mm width options available.
Extendable lengths
Extend the length of the continuous flight auger with the use of hex joiners and D-Clips.
Quick View -
Digga Custom Augers
Read more
Read moreWith over 30 years of drilling knowledge and manufacturing experience, Digga can provide you with a custom auger solution for any drilling application. Constructed with the highest grade steel in Digga’s fully equipped Australian owned and operated manufacturing facility, we ensure you’re only getting Australian made quality and durability. Our experienced drilling specialists will help you in constructing the right auger for your needs. Everything from the right cutting head to flight and pitch configurations and also choosing the right wear parts and accessories. Need extra long flights? Visit our Continuous Flight Auger section.
Australian made quality
Over 30 years of auger design and manufacturing using only the highest quality material has resulted in an extremely efficient cutting head design and optimum flight pitches to provide maximum soil removal in all ground conditions.
Hub Options
Square, round and hex hub options available to suit your existing drive unit or drilling rig.
Size options
Your custom auger can be made to any length and to your preferred drilling diameter. To request an auger custom-made to suit your specific application, visit our Custom Auger Request page.
Pitch and flighting
Choose between a shallow pitch and a steep pitch configuration or even combination of both depending on the application. For optimum spoil removal, choose between a double start/single flight configuration or a full doubled flighted configuration. Need extra long flights? Visit our Continuous Flight Auger section.
Cutting heads
The key to efficient drilling is the auger cutting head. Depending on the ground condition, choose between a bladed cutting head and a tapered cutting head design. You also have the option of a single cut or a double cut configuration.
Wear Parts and pilots
Our extensive range of quality wear parts and pilots are designed to suit most ground conditions. Choose between flat/chisel, tapered tooth or rotating rock pick configurations.
Quick View -
Digga Diggalign Inclinometer
Read more
Read moreThe New Diggalign inclinometer was developed for contractors where accuracy is key. Ideal for drilling, screw piling & core barrelling applications. Designed to show the operator when the top of the pylon/pile/auger is off plumb, and helps to maintain accuracy throughout the installation.
Features & Benefits
- 2 Options available
- Standard Definition with increments in 2°
– Recommended for piles/augers under 4m (13ft) - High definition with increments in 0.5°
– Recommended for piles/augers over 4m (13ft)
- Standard Definition with increments in 2°
- Suits all machinery with a variety of harness lengths
- Can be retrofitted to existing drives
- Increased job site efficiency
- Can be calibrated for angles up to 20°
- Highlights misalignment forward and aft
- Dual supply cable with both 12V and 24V
Quick View - 2 Options available
-
Digga Excavator – Mega Drive 110,000Nm – 190,000Nm
Read more
Read moreDigga’s Mega Drive range of screw anchor drives produce between 110,000Nm and 190,000Nm. Fitted with our patented anti-kickback valve, which controls the rapid decompression of oil caused during the application of foundation piles, you’ll get maximum life and performance. Using only superior quality, highly volumetric efficient hydraulic motors, Digga anchor drives efficiently utilise the total available power of your machine – Delivering consistent and efficient pile installation throughout your working day, more lineal metres in the ground, and maximum returns.
- 2 Speed drive system
- Compact high quality Digga manufactured gearbox
- Pressure Relief Valve fitted standard
- Built-in ECV (Energy Control relief Valve)
- Highest volumetrically efficient motors available
- Extreme duty shaft locking system
- No complex hoses, valving, or filtration
- 1yr gear box and 1yr motor warranty
Quick View -
Digga Excavator – Supa Drive 45,000Nm – 90,000Nm
Read more
Read moreDigga’s Supa Drive range of screw pile anchor drives produce between 45,000Nm and 90,000Nm. Fitted with our patented anti-kickback valve, which controls the rapid decompression of oil caused during the application of foundation piles, you’ll get maximum life and performance. Using only superior quality, highly volumetric efficient hydraulic motors, Digga anchor drives can be fitted with a selection of motor options to efficiently utilise the total available horsepower of your machine. Delivering consistent and efficient pile installation throughout your working day, more lineal metres in the ground, and maximum returns.
- Compact high quality Digga manufactured gearbox
- Built-in ECV (Energy Control relief Valve)
- Highest volumetrically efficient motors available
- Extreme duty shaft locking system
- No complex hoses, valving, or filtration
- 2 Speed drives available up to 380 lpm (peak) no machine detuning necessary
- 1yr gear box and 1yr motor warranty
Quick View -
Digga Excavator – Ultra Drive 190,000Nm – 300,000Nm
Read more
Read moreDigga’s Ultra Drive range of screw anchor drives produce between 190,000Nm and 300,000Nm. Fitted with our patented anti-kickback valve, which controls the rapid decompression of oil caused during the application of foundation piles, you’ll get maximum life and performance. Using only superior quality, highly volumetric efficient hydraulic motors, Digga anchor drives can be fitted with a selection of motor options to efficiently utilise the total available horsepower of your machine. Delivering consistent and efficient pile installation throughout your working day, more lineal metres in the ground, and maximum returns.
- Compact high quality Digga manufactured gearbox
- Built-in ECV (Energy Control relief Valve)
- Highest volumetrically efficient motors available
- Extreme duty shaft locking system
- No complex hoses, valving, or filtration
- 2 Speed drives available up to 300 lpm (peak) no machine detuning necessary
- 1yr gear box and 1yr motor warranty
Quick View