Attachments
Showing 37–48 of 97 results
-
Digga Mini Brooms
Read more
Read moreFeatures:
- Easy use, built in brush adjustment handles.
- Hinged lid for fast emptying.
Ideal use:
Sweep and collect all kinds of debris, in factories, car parks, road construction, stock yards, shipping
containers and more.Suit Machine Types:Â Mini Machines and Small Skids Steers
Quick View -
Digga Mini Carryall Leveller
Read more
Read moreDigga’s Mini Carryall Leveller is perfect for carrying around bulky items and levelling a variety of surfaces.
Features:
- 1225mm wide
- Easy pickup design
- Suitable for spreading/levelling soils
Ideal use:
Transporting bulky items such as paving tiles, cement bags etc, in addition, to be able to be used as a leveller on soils and bedding sand for pavers.Suit Machine Types:Â Mini Machines and Small Skids Steers
Quick View -
Digga Mini Excavator 2T – 5T Auger Drives
Read more
Read moreDigga’s PDX2 to PD6 range of earth drills are ideally suited for mini excavators 2 tonnes to 5 tonnes with a flow between 30 to 115 lpm. Innovative design allows the gearbox to go down the hole to maximise drilling depth without extentions, eliminating downtime and minimises maintenance, optimising your returns. Digga planetary auger drives are fitted with Digga / Eaton bell motors specially designed for drilling and augering in most ground conditions.
- Compact high torque Digga manufactured gearbox
- Highly efficient design with less moving parts
- Fitted with Eaton/Digga geroler hydraulic motor
- No case drain required
- Full range of shafts available upon request
- Extreme duty shaft locking system
- Drive fits down the hole for greater digging depth
- Low maintenance with 5yr gear box and 3yr motor warranty
Quick View -
Digga Mini Pallet Forks
Read more
Read moreSuit Machine Types:
Mini Loaders, Kanga, Dingo, Toro and Vermeer.Features:
- Australian made and designed from quality steel.
- 900kgs load rated
Quick View -
Digga Mini Under Road Borer
Read more
Read moreDigga’s Mini Under Road Borer has a horizontal head which drops below ground level for under road boring or reaming.
Features:
- Eliminates pavement removal for pipe and cable laying.
- Custom Under Road Borers enable stacking of augers for longer holes.
- 1500mm Extra Long Continous Flighted Augers.
- 2 Removable Pilots for the augers; 80mm diameter and 90mm diameter.
- 2 Auger widths available; 65mm diameter and 80mm diameter.
- Joiner and D Clip available for easy connection of the augers.
Ideal use:
Under Road Boring and reaming for installation of pipes and cables.Suit Machine Types:Â Mini Machines and Small Skids Steers
Quick View -
Digga Multifit Pallet Forks
Read more
Read moreInnovative pallet forks for skid steer loaders designed with operator safety in mind. A non-multifit frame design is also available, as well as mini pallet forks for mini machines.
Tyne bar locking system
Easy width adjustment with lockable tyne positions (Patent Pending)
Floating tyne design
Allows the tynes to swing freely from a single lockable point ensuring load and operator safety. Available in 1500kg and 1800kg lifting capacities. Tynes load rating tested to ISO 2330 Standards.
Heavy-duty frame
Heavy duty, quality Australian made frame with added stability for easy connection to your machine.
Foldable safety guard
Safety guard folds down for compact storage when pallet fork is not in use.
Machine entry step
Entry step can be mounted on either side of the pallet fork frame for easy machine access.
Slim design packaging
Designed for easy handling, shipping and storage. Assembly is simple and quick. Click here to watch the pallet fork assembly videos.
Quick View -
Digga Pallet Forks
Read more
Read moreA floating tyne design offers unparalleled safety for skid steer loaders. Unlike forklifts, skid steers are able to crowd their pickup past horizontal allowing the machine to be placed in an unsafe position which could cause it to tip over. Furthermore, putting the machine’s weight on the tynes may cause them to weaken or break. Digga’s pallet fork design allows the tynes to swing freely from a single fixed point ensuring load and operator safety. Also available: Pallet Forks for Multifit Skid Steers and Pallet Forks for Mini Machines
If you care about safety then a floating tyne design is the only safe choice for skid steer loaders.
- Australian made frame designed from quality steel
- Load rating tested to Australian Standard AS 2359.1
- Easy quick fit attachment for most skid steer loaders
- 1200kg, 1600kg and 1900kg load ratings available
- Bale spears/pallet fork combo frame also available
- Easy width adjustment
Machine Suitability
Suits skid steer loaders, front end loaders, and Telehandlers.
Quick View -
Digga Pressure Differential Gauge
Read more
Read moreWhen screw anchoring, a torque reading is required to ensure the pile/pier has been screwed in at the correct specification. Project engineers will generallly demand that a specific torque amount is reached depending on what the piles or piers are being used for.
Traditionally, torque is calculated by a single sensor located at the hydraulic pump in the excavator. Unfortunately, this is not accurate as pressure is lost as oil travels up the boom through the drive unit and back again along the boom to the excavator. Pressure readings can be out by as much as 15-20% compared to actual working pressure.
- Digital display of analogue signals
- Clear 4-digit 7-segment LED display
- Up to 3 analogue inputs ( 4.. 20mA or 0 .. 5 V)
- Accuracy ≤ ± 0.5%
- Differential measurement possible
- Analogue output ( 4.. 20mA or 0 .. 10 V)
- Up to 4 relay switching outputs
- RS232 interface
- Voltage supply – 12 .. 32V DC
- Option for PT100 sensor input or frequency input
Quick View -
Digga Rear Mounted Post Hole Digger
Read more
Read moreDigga manufactures a range of 3pt linkage PTO shaft driven, rear mounted hole post diggers (ram drills) and PHD hydraulic tractor borers for drilling holes. They are easy to mount and store and offer class leading performance.
3pt linkage rear mounted post hole diggers for tractors are available in 25hp, 50hp and 75hp. Non-3pt linkage PTO models are also available for tractors with 50hp and 75hp, and PHD hydraulic models for tractors with 45-115lpm hydraulic flow.
- Heavy duty fully adjustable frame
- Adjustable stabiliser legs for ease of fitment and storing
- Australian Made Quality with lifetime shaft pullout warranty
- Powered by Eaton hydraulic motors with multiple shaft options
- 5 year gearbox and 3 year motor warranty
3 Options Available
Digga rear mounted post hole diggers have multiple shaft options available for tractors with 3 point linkage or a 3 point linkage adapter with a minimum of 2 double acting auxiliary ports. They are ideal for post holes, fencing, and tree planting.
Quick View -
Digga Skid Steer High Flow Auger Drives
Read more
Read moreDigga’s PD4HF to PD6HF range of drilling auger drive units are ideally suited for high flow skid steer loaders with a flow between 50 to 150 lpm and are fitted with Digga / Eaton bell motors with intergrated pressure relief valve and input housing. The innovative design allows the gearbox to go down the hole to maximise drilling depth without extentions, eliminating downtime and minimises maintenance, optimising your returns. Digga planetary auger drives are specially designed for drilling and augering in most ground conditions.
- Compact high torque Digga manufactured gearbox
- Highly efficient design with less moving parts
- Fitted with Eaton/Digga geroler hydraulic motor
- No case drain required
- Full range of shafts available upon request
- Extreme duty shaft locking system
- Drive fits down the hole for greater digging depth
- Low maintenance with 5yr gear box and 3yr motor warranty
Quick View -
Digga Skid Steer Loader Auger Drives
Read more
Read moreDigga’s PD3 to PD6 range of premium drilling auger drives are ideally suited for skid steer loaders with a flow between 45 to 115 lpm. Digga planetary auger drives are fitted with Digga / Eaton bell motors specially designed for drilling and augering in most ground conditions. The innovative design allows the gearbox to go down the hole to maximise drilling depth without extensions, eliminating downtime and minimises maintenance, optimising your returns.
- Compact high torque Digga manufactured gearbox
- Highly efficient design with less moving parts
- Fitted with Eaton/Digga geroler hydraulic motor
- No case drain required
- Full range of shafts available upon request
- Extreme duty shaft locking system
- Drive fits down the hole for greater digging depth
- Low maintenance with 5yr gear box and 3yr motor warranty
Quick View -
Digga Standard 4 in 1 Bucket
Read more
Read moreDigga’s 4 in 1 bucket has an extensive range to suit most machines – including skid steers, mini loaders, and tractors. Ideal for grading, scraping, grappling, dozing dirt or material spreading, and most construction work.
- Standard Heavy Duty 20mm Floors
- 12mm and 16mm floors available on request
- Side curved sections for greater bucket opening width
- 1 piece heavy duty fully welded 6mm grill/hungry board
- Full range available from 880mm to high volume 2130mm
- High visibility design: Clear vision of bucket edges
- Optional reversible bolt-on cutting edges
- Optional chisel or tiger teeth with pin on design
- Grabbing teeth profiled on both front/rear overlap for greater grip of logs or other debris
Quick View