Digga 2 Speed High Flow 20-50T Auger Drives

Digga’s 2 speed drilling auger drives for High flow machines have been designed for a wider range of applications. Offering a high speed, low torque setting for the smaller auger jobs when you need that extra RPM, and low speed, high torque for when you really need to grind out that larger diameter hole. It’s like having 2 drive units in 1.

Two speed drives suit excavators & skid steer loaders, truck cranes, front end loaders, wheeled loaders, and backhoes.

  • Improved motor design & performance with 2 Speed options:
    • Low speed – High torque for large holes
    • High speed – Low torque for smaller holes
  • Suitable for a wide range of ground conditions:
    • Soft loose soils, hard soils, and rocky conditions
  • Integrated PRV (Pressure Relief Valve)
  • Simple electrical connection:
    • 12 or 24 volt coil, just requiring connection
    • Optional joystick switches, floor mounted switches & cigarette plugs available pre-wired to suit
  • Low maintenance with 5yr gear box and 3yr motor warranty
Categories: , , ,
SPECIFICATION PDT25 PDT30 PDT40 PDT50
Rec Flow Range 40-180 lpm 40-180 lpm 40-180 lpm 40-180 lpm
Nominal Torque 27373 Nm 31829 Nm 33733 Nm 39224 Nm
Motor Vis EATON Vis EATON Vis EATON Vis EATON
Pressure Valve Fitted Included Included Included Included
Energy Control Valve Optional Optional Optional Optional
Case Drain Required Yes Yes Yes Yes
Max Pressure –   –   –   –   –   Do not exceed 240 bar @ 150 lpm  –   –   –   –   –
Max Flow –   –   –   –   –   Do not exceed 180 lpm @ 200 bar –   –   –   –   –
Max Continuous Power –   –   –   –   –   Do not exceed 60 Kw (80 hp)   –   –   –   –   –   –
Overall Length 1217 mm 1217 mm 1217 mm 1217 mm
Diameter 355 mm 355 mm 355 mm 355 mm
Weight (no frame / hitch) 400 kg 400 kg 400 kg 400 kg
Std Output Shaft 100 mm Square 100 mm Square 100 mm Square 100 mm Square
Swing Control Optional Optional Optional Optional
Diggalign Optional Optional Optional Optional
Rec Auger 10 / 11 Series 10 / 11 Series 10 / 11 Series 10 / 11 Series
Max Auger Dia Clay / Shale 1200 mm 1200 mm 1500 mm 1500 mm
Max Auger Dia Earth 1600 mm 1800 mm 1800 mm 1800 mm

(*) Max/min drilling diameter (DIA) dependant on ground conditions. Guide is a recommendation only.

Related products

  • Digga Continuous Flight Augers

    Read more

    Digga Continuous Flight Augers

    Digga manufactures a range of continuous flight augers ideally suited for soil sampling, under road boring and drilling for bore water. Continuous flight augers suit Exploratory Micro Drill Rigs, Small Soil Sampling Vehicles and Mini Loader Drill Mast. Need a complete custom solution? Visit our Custom Auger section.

    Australian made quality

    Over 30 years of auger design and manufacturing using only the highest quality material has resulted in an extremely efficient cutting head design and optimum flight pitches to provide maximum soil removal in all ground conditions.

    Replaceable Pilots

    A variety of pilots are available in Tungsten or Multi Faced Tungsten to suits standard to hard ground conditions. 80mm to 125mm sizes available.

    Length and width options available

    1200mm to 1800mm length options and 65mm to 200mm width options available.

    Extendable lengths

    Extend the length of the continuous flight auger with the use of hex joiners and D-Clips.

    Read more
    Quick View

  • Digga 2 Speed High Flow 15-22T Auger Drives

    Read more

    Digga 2 Speed High Flow 15-22T Auger Drives

    Digga’s 2 speed drilling auger drives for High flow machines have been designed for a wider range of applications. Offering a high speed, low torque setting for the smaller auger jobs when you need that extra RPM, and low speed, high torque for when you really need to grind out that larger diameter hole. It’s like having 2 drive units in 1.

    Two speed drives suit excavators & skid steer loaders, truck cranes, front end loaders, wheeled loaders, and backhoes.

    • Improved motor design & performance with 2 Speed options:
      • Low speed – High torque for large holes
      • High speed – Low torque for smaller holes
    • Suitable for a wide range of ground conditions:
      • Soft loose soils, hard soils, and rocky conditions
    • Integrated PRV (Pressure Relief Valve)
    • Simple electrical connection:
      • 12 or 24 volt coil, just requiring connection
      • Optional joystick switches, floor mounted switches & cigarette plugs available pre-wired to suit
    • Low maintenance with 5yr gear box and 3yr motor warranty
    Read more
    Quick View

  • Digga Skid Steer High Flow Auger Drives

    Read more

    Digga Skid Steer High Flow Auger Drives

    Digga’s PD4HF to PD6HF range of drilling auger drive units are ideally suited for high flow skid steer loaders with a flow between 50 to 150 lpm and are fitted with Digga / Eaton bell motors with intergrated pressure relief valve and input housing. The innovative design allows the gearbox to go down the hole to maximise drilling depth without extentions, eliminating downtime and minimises maintenance, optimising your returns. Digga planetary auger drives are specially designed for drilling and augering in most ground conditions.

    • Compact high torque Digga manufactured gearbox
    • Highly efficient design with less moving parts
    • Fitted with Eaton/Digga geroler hydraulic motor
    • No case drain required
    • Full range of shafts available upon request
    • Extreme duty shaft locking system
    • Drive fits down the hole for greater digging depth
    • Low maintenance with 5yr gear box and 3yr motor warranty
    Read more
    Quick View

  • Digga Excavator 20T – 50T Auger Drives

    Read more

    Digga Excavator 20T – 50T Auger Drives

    Digga’s PD25 to PD50 range of drilling auger drives are ideally suited for 20 to 50t excavators with a flow between 70 to 230 lpm. Fitted with Digga / Eaton bell motors with intergrated pressure relief valve and input housing. An innovative design allows the gearbox to go down the hole to maximise drilling depth without extentions, eliminating downtime and minimises maintenance, optimising your returns. Digga planetary auger drilling drives are specially designed for drilling and augering in most ground conditions.

    • Compact high torque Digga manufactured gearbox
    • Highly efficient design with less moving parts
    • Fitted with Eaton/Digga geroler hydraulic motor
    • No case drain required
    • Full range of shafts available upon request
    • Extreme duty shaft locking system
    • Drive fits down the hole for greater digging depth
    • Low maintenance with 5yr gear box and 3yr motor warranty
    Read more
    Quick View
Menu