Digga 2 Speed High Flow 30-50T Auger Drives

Digga’s 2 speed drilling auger drives for High flow machines have been designed for a wider range of applications. Offering a high speed, low torque setting for the smaller auger jobs when you need that extra RPM, and low speed, high torque for when you really need to grind out that larger diameter hole. It’s like having 2 drive units in 1.

Digga’s SD two speed drive range for drilling suits large excavators & truck cranes with flows up to 380 lpm.

  • Improved motor design & performance with 2 Speed options:
    • Low speed (low RPM) – High torque for large holes
    • High speed (high RPM) – Low torque for smaller holes
  • Suitable for a wide range of ground conditions:
    • Soft loose soils, hard soils, and rocky conditions
  • Integrated PRV (Pressure Relief Valve)
  • Simple electrical connection:
    • 12 or 24 volt coil, just requiring connection
    • Optional joystick switches, floor mounted switches & cigarette plugs available pre-wired to suit
  • Low maintenance with 1yr gear box and 1yr motor warranty
Categories: , , ,
SPECIFICATION SD45 SD50 SD70 SD80 SD95
Max Torque @ 240 Bar 44,333 Nm 51,985 Nm 68,018 Nm 81,986 Nm 91,215 Nm
Motor Radial Piston Radial Piston Radial Piston Radial Piston Radial Piston
Pressure Valve Fitted Included Included Included Included Included
Energy Control Valve Included Included Included Included Included
Case Drain Required Yes Yes Yes Yes Yes
Max Pressure –   –   –   –   –   –   –   –   –   –   Do not exceed 240 bar @ 380 lpm  –   –   –   –   –   –   –   –   –   –
Max Flow –   –   –   –   –   –   –   –   –   –   Do not exceed 380 lpm @ 240 bar –   –   –   –   –   –   –   –   –   –
Max Continuous Power –   –   –   –   –   –   –   –   –   –   –   –   Do not exceed 150 Kw   –   –   –   –   –   –   –   –   –   –   –   –   –
Overall Length 1493 mm 1493 mm 1493 mm 1493 mm 1493 mm
Diameter 600 mm 600 mm 600 mm 600 mm 600 mm
Weight (no frame / hitch) 838 kg 836 kg 836 kg 836 kg 843 kg
Std Output Shaft 100 mm Square 100 mm Square 100 mm Square 100 mm Square 100 mm Square
Diggalign Optional Optional Optional Optional Optional
Rec Auger 10 / 11 Series 10 / 11 Series 10 / 11 Series 10 / 11 Series 10 / 11 Series
Max Auger Dia Fract. Rock 1500 mm 1500 mm 1500 mm 1500 mm 1500 mm
Max Auger Dia Clay / Shale 1500 mm 1500 mm 1500 mm 1500 mm 1500 mm
Max Auger Dia Earth 1800 mm 1800 mm 1800 mm 1800 mm 1800 mm

(*) Max/min drilling diameter (DIA) dependant on ground conditions. Guide is a recommendation only.

Related products

  • Digga XO / XT 100 Auger extensions up to 30T

    Read more

    Digga XO / XT 100 Auger extensions up to 30T

    Digga’s drilling extension range is the ultimate in quality and cost effectiveness. Manufactured inhouse by Digga using only the highest grade materials and strictest quality control. The X0100 and XT100 range of extensions is suited for machines up to 30 tonnes.

    Easy fit design

    Easy fit design with no adaptors required helping you connect and disconnect your augers faster. Featuring eyelets as lifting lugs and tie down points (telescopic) and eyelets to suspend the extension and auger in the hole while another is added or removed (outer).

    Reduce excess play

    Welded hub and shaft reduces excess play in the connections ensuring a straighter hole.

    Telescopic extensions

    Telescopic design makes it easier to drill deeper as well as easier to transport. Inner extensions can be slid inside outer extensions and augers saving space and reducing loading time.

    7 Lengths available

    7 length options available including 1000 / 1500 / 2000 / 2500 / 3000 / 35000 / 4000 mm extension lengths.

    Australian made

    Our product quality and innovation leads the industry. 100% Australian made, designed and manufactured for Australian conditions, providing you with versatility, competitive pricing and a factory-backed warranty.

    Read more
    Quick View

  • Digga Anti Kickback Valve – ECV

    Read more

    Digga Anti Kickback Valve – ECV

    Screw anchors are installed to an engineering torque specification. By the time installation torque is reached and the operator stops the machine, the pile has built up rotational energy (somewhat like a rubber band on a wind up model aeroplane). This causes the pile to momentarily ‘kick back’,
    forcing the energy back up the pile through to the drive shaft, the gearbox, and the hydraulic motor.

    This action effectively turns the motor into a high speed pump, generating cavitation of the motor, which causes motor failure and expensive replacement costs. Digga’s revolutionary flow reversal bypass valve (ECV) can be fitted to the drive manifold to control the release of this energy.

    • Protects motor from rapid oil decompression
    • Easily convert your auger drive into a screw anchor drive
    • Digga’s Energy Control Valve also known as Swoosh Valve can be fitted to all PD drive units for screw anchoring applications. ECV comes standard on all Digga anchor drives
    Read more
    Quick View

  • Digga 10 & 11 Series augers: 20-50T

    Read more

    Digga 10 & 11 Series augers: 20-50T

    Our 10 & 11 Series augers suit Backhoes, Excavators, large Telehandlers, and machines up to 50t. For efficient drilling, we designed effective auger cutting heads, so depending on ground conditions, you can choose between a tapered cutting head, or rotating rock picks. For extra length, we also have a full range of auger extensions.

    Australian made quality

    With over 30 years of auger design and manufacturing using the highest quality material, Digga augers boast extremely efficient cutting head designs, heavy duty tubing, and optimum flight pitches to provide maximum spoil removal in all ground conditions.

    RC10/RC11 earth/rock

    Digga’s RC10 & RC11 Augers come with tapered tungsten TAPERLOC teeth, which are designed for drilling in earth, shale, asphalt, permafrost and fracturable rock.

    DR11 dedicated rock

    DR augers feature rotating rock picks for drilling from soft fracturable rock to very hard rock. Featuring short flighting, the design encourages regular spoil removal, allowing cool air to enter the hole, and facilitate regular tooth inspection. Watch our rock auger overview video.

    Read more
    Quick View

  • Digga Custom Augers

    Read more

    Digga Custom Augers

    With over 30 years of drilling knowledge and manufacturing experience, Digga can provide you with a custom auger solution for any drilling application. Constructed with the highest grade steel in Digga’s fully equipped Australian owned and operated manufacturing facility, we ensure you’re only getting Australian made quality and durability. Our experienced drilling specialists will help you in constructing the right auger for your needs. Everything from the right cutting head to flight and pitch configurations and also choosing the right wear parts and accessories. Need extra long flights? Visit our Continuous Flight Auger section.

    Australian made quality

    Over 30 years of auger design and manufacturing using only the highest quality material has resulted in an extremely efficient cutting head design and optimum flight pitches to provide maximum soil removal in all ground conditions.

     

    Hub Options

    Square, round and hex hub options available to suit your existing drive unit or drilling rig.

    Size options

    Your custom auger can be made to any length and to your preferred drilling diameter. To request an auger custom-made to suit your specific application, visit our Custom Auger Request page.

    Pitch and flighting

    Choose between a shallow pitch and a steep pitch configuration or even combination of both depending on the application. For optimum spoil removal, choose between a double start/single flight configuration or a full doubled flighted configuration. Need extra long flights? Visit our Continuous Flight Auger section.

    Cutting heads

    The key to efficient drilling is the auger cutting head. Depending on the ground condition, choose between a bladed cutting head and a tapered cutting head design. You also have the option of a single cut or a double cut configuration.

    Wear Parts and pilots

    Our extensive range of quality wear parts and pilots are designed to suit most ground conditions. Choose between flat/chisel, tapered tooth or rotating rock pick configurations.

    Read more
    Quick View
Menu