An evolution from the tried and proven design of the Digga 4 in 1 Skid Steer Bucket. Updated to suit the needs of the agricultural industry, while still incorporating many of the features skid steer owners enjoy.
| SPECIFICATION | 1550 | 1600 | 1650 | 1680 | 1727 |
|---|---|---|---|---|---|
| Bucket Cutting Width | 1550 mm | 1600 mm | 1650 mm | 1680 mm | 1727 mm |
| Weight | 285 kg | 300 kg | 310 kg | 315 kg | 320 kg |
| M3 Volume | 0.3 | 0.31 | 0.32 | 0.325 | 0.33 |
| SPECIFICATION | 1800 | 1880 | 2000 | 2130 | 2200 |
|---|---|---|---|---|---|
| Bucket Cutting Width | 1800 mm | 1880 mm | 2000 mm | 2130 mm | 2200 mm |
| Weight | 330 kg | 340 kg | 360 kg | 380 kg | 390 kg |
| M3 Volume | 0.34 | 0.36 | 0.38 | 0.4 | 0.42 |
Digga’s PD3 to PD6 range of premium drilling auger drives are ideally suited for skid steer loaders with a flow between 45 to 115 lpm. Digga planetary auger drives are fitted with Digga / Eaton bell motors specially designed for drilling and augering in most ground conditions. The innovative design allows the gearbox to go down the hole to maximise drilling depth without extensions, eliminating downtime and minimises maintenance, optimising your returns.
Hole Cleaners are used to remove spoil from holes after drilling to create a clean and flattened base. Digga Hole Cleaners can be fitted with either a fixed or removable shaft. Ideal application includes installation of piers and concrete foundations. Suitable for machines up to 10 tonnes.
The Digga Hole Cleaner clears auger spoil from the bottom of the hole, leaving a clean and flattened base.
65mm round and 75mm square shaft options including fixed or removable shaft for ease of storage and transportation. Removable shaft can also double up as an extension.
The Digga Hole cleaners are made in Australia from quality material. Digga is a proud Australian manufacturer committed to keeping jobs in the country.
Screw anchors are installed to an engineering torque specification. By the time installation torque is reached and the operator stops the machine, the pile has built up rotational energy (somewhat like a rubber band on a wind up model aeroplane). This causes the pile to momentarily ‘kick back’,
forcing the energy back up the pile through to the drive shaft, the gearbox, and the hydraulic motor.
This action effectively turns the motor into a high speed pump, generating cavitation of the motor, which causes motor failure and expensive replacement costs. Digga’s revolutionary flow reversal bypass valve (ECV) can be fitted to the drive manifold to control the release of this energy.
Our single speed high powered range of auger drives have been designed to handle higher machine hydraulic pressures to deliver more power at higher RPM to suit drilling applications on 15 to 30 tonne machines. Fitted with a high efficiency radial piston motor and integrated input housing, these drives will help you increase productivity and reduce downtime to optimise your returns.
Digga have been designing and manufacturing drilling gearboxes for over 30 years. Unlike others who have to adapt to off-the-shelf componentry for their gearboxes, we design every component for its intended purpose, resulting in a much more compact and powerful drive.
A highly reliable motor high in power yet low in maintenance, delivering faster drilling speeds at high torque. No need to sacrifice speed for torque or torque for speed.
A two-piece shaft design isolates the planetary gears from excessive side load. Oversized thrust washer and lock nuts secure the shaft. This promotes easy seal changes and servicing. Our shaft design prevents the shaft from falling out, even under continuous use.
Digga drive units are made right here in Australia from quality materials. Digga is a proud Australian manufacturer committed to keeping jobs in the country.