Gehl R105 Skid Loader


The R105 is built for efficiency. Super Hi-Power drive chains feature heavy, high-strength construction designed for the most rugged conditions.

  • Longer wheelbase and a low center-of-gravity offer a smooth, stable ride.
  • Hydraloc™ automatic interlock system locks lift, tilt and drive systems when the operator leaves the seat, increasing operator safety. System also engages when the restraint bar is raised or the ignition switch is turned off.
  • Lift arm hydraulic tubes are concealed and protected from the work environment.
  • Rated operating load can be readily increased with the addition of a counterweight.


A  Overall Operating Height – Fully Raised 3546 mm
B  Height to Hinge Pin – Fully Raised 2731 mm
C  Overall Height to Top of ROPS 1786 mm
D  Overall Length with Bucket 2896 mm
E  Dump Angle at Full Height 42°
F  Dump Height 2146 mm
G  Dump Reach at Full Height 579 mm
J  Rollback at Ground 29°
M  Rollback Angle at Full Height 99°
O  Seat to Ground Height 828 mm
P  Wheelbase 876 mm
Q  Overall Width – Less Bucket A 1229 mm
R  Bucket Width 1404 mm
S  Ground Clearance to Chassis 152 mm
V  Overall Length – Less Bucket 2258 mm
W  Departure Angle 26°
X  Clearance Circle – Front w/ Bucket 1763 mm
Y  Clearance Circle – Front w/o Bucket 1120 mm
Z  Clearance Circle – Rear 1374 mm
Standard Specification Tire Size 27×8.5 x 15 HD


Make Yanmar
Model 3TNV88C-KMS
Tier IV
Gross Power @ 2500 rpm 25.5 kW

(34.7 hp)
Net Power @ 2500 rpm 24.7 kW

(33.1 hp)
Maximum Torque 109.4 Nm @ 1820
Displacement 1.6 L

Hydraulic System

Auxiliary Hydraulics – Standard 55 L/min
High-Flow Auxiliary Hydraulics – Option N/A
Reservoir Capacity 30.3 L

Electrical System

Battery 675 CCA
Starter 2.3 kW
Alternator 40-amp


Rated Operating CapacityB 476 kg
Rated Operating Capacity with Optional CounterweightB 533 kg
Fuel Tank 39.4 L
Travel Speed – Maximum 9.5 km/hr
Travel Speed with Two-Speed Option – Maximum N/A
Operating WeightC – Approximate 1814 kg

A – Overall width is dependent upon the amount of wheel offset.

B – Per SAE J818, SAE J732, and ISO 14397

C – Weight of base unit with standard equipment, standard tires (heavy-duty flotation), standard dirt-construction bucket and 79 kg operator.