Gehl RT185 Track Loader

  • Rated Operating Capacity at 35% Tipping Load: 794 kg
  • Net Power: 51 kW
  • Lift Height: 3251 mm

Dimensions

A  Overall Operating Height – Fully Raised 4267 mm
B  Height to Hinge Pin – Fully Raised 3251 mm
C  Reach – Fully Raised 876 mm
D  Dump Angle – Fully Raised 40.2°
E  Dump Height – Fully Raised 2489 mm
F  Maximum Rollback Angle – Fully Raised 102.5°
G  Overall Height at ROPS 2103 mm
H  Overall Length with Bucket – Standard Counterweight 3754 mm
I  Overall Length without Bucket – Standard Counterweight 2921 mm
J  Specified Height 1715 mm
K  Reach at Specified Height 790 mm
L  Dump Angle at Specified Height 66.8°
M  Maximum Rollback Angle at Ground 30°
N  Carry Position 208 mm
O  Maximum Rollback Angle at Carry Position 31.6°
P  Digging Position + Above Ground 23 mm
Q  Angle of Departure with Standard Counterweight 30.4°
R  Ground Clearance 318 mm
S  Track Gauge 1313 mm
T  Track Shoe Width 320 mm
U  Crawler Base 1392 mm
V  Overall Width – Less Bucket 1636 mm
W  Bucket Width 1674 mm
X  Clearance Radius – Front With Bucket 2322 mm
Z  Clearance Radius – Rear with Standard Counterweight 1666 mm
Maximum Rollback at Specified Height 66.8°
Angle of Approach 90°
Grouser Height 25 mm

Capacity

Operating Capacity at 35% Tipping Load 839 kg
Operating Capacity at 50% Tipping Load 1199 kg
Tipping Load 2398 kg
Operating Weight 4128 kg

Engine

Make/Model Yanmar / 4TNV98C-NMSL
Type 4-Stroke Naturally Aspirated
Displacement/Cylinders 3.319 L/4
Gross Power @ rpm 52.1 kW @ 2500

(69.9 hp @ 2500)
Net Power @ rpm 51 kW @ 2500

(68.4 hp @ 2500)
Peak Torque @ rpm 241 Nm @ 1625
Oil Pump Capacity 10.4 L
Alternator Voltage/Amperage 14V/100A

Track Drives

Drawbar Pull/Tractive Effort 4635 kg
Track Type/Track Rollers/Roller Type Rubber/4/Steel
Track Width 320 mm
Ground Pressure 0.43 bar

Forces

Bucket Breakout – Tilt Cylinder 2429 kg
Bucket Breakout – Lift Cylinder 2275 kg
Ground Speed – Single Speed 9.5 km/hr
Ground Speed – Two Speed 14.2 km/hr

Volume

Fuel Tank 91 L
Hydraulic Reservior Tank 41.6 L
Coolant Capacity 13.3 L

Hydraulics

Auxiliary Hydraulic Flow – Rated Speed @ rpm 70 L/min @ 2500
Hight-Flow Hydraulic Flow – Rated Speed 128.8 L/min
Transmission Pump Type Axial Piston
Motor Type Axial Piston with Planetary Gear Box Reduction

Electronic System

Battery Volts 12V
Cold Cranking Amps at Temperature 850 CCA @ -18°C

Sounds & Vibration

Sound Power 103.0 dB
Operator Ear 82.0 dB
Hand/Arm Vibration ≤ 2.73 m/s²
Operator Ear ≤ 0.98 m/s²

Gehl Compact Track Loader RT215 Specifications Diagram

Menu